International |
Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound
|
210 |
International |
Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids
|
165 |
International |
Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants
|
686 |
International |
Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data
|
226 |
International |
Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter
|
144 |
Award |
2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
|
627 |
Award |
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)
|
531 |
Award |
2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)
|
501 |
International |
Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods
|
2585 |
Award |
IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)
|
886 |
Award |
2022 산업과학연구소 우수논문상 (박성현)
|
793 |
International |
In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)
|
1164 |
International |
Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques
|
1376 |
International |
Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)
|
12589 |
International |
Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)
|
26507 |
Domestic |
Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing
|
124900 |
International |
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
|
20281 |
International |
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
|
29337 |
International |
Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces
|
50350 |
International |
Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter
|
46128 |
International |
Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection
|
43711 |
International |
Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers
|
36739 |
International |
Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)
|
12258 |
International |
Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces
|
21751 |
International |
Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer
|
510788 |
International |
Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique
|
31926 |
International |
Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve
|
66529 |
International |
Ultrasonic nonlinearity parameter in uniaxial stress condition
|
43521 |
International |
Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel
|
7113 |
Award |
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)
|
2308 |
Award |
2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)
|
759 |
Award |
2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)
|
10878 |
Award |
2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)
|
19625 |
Award |
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)
|
20803 |
Award |
2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)
|
23149 |
International |
Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves
|
66538 |
International |
Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials
|
86166 |
International |
Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel
|
31136 |
Domestic |
Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves
|
35081 |
Award |
2018 산업통상자원부장관 위촉장
|
29468 |
Award |
2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)
|
32424 |
Award |
2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)
|
86470 |
International |
Internal defect detection using laser-generated longitudinal waves in ablation regime
|
109106 |
International |
Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves
|
88264 |
Domestic |
Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time
|
62552 |
International |
Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy
|
74625 |
International |
Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave
|
100423 |
International |
A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements
|
86943 |
International |
Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness
|
99484 |
Award |
2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)
|
50151 |
Award |
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)
|
62034 |
Award |
2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
|
64781 |
Award |
2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)
|
65868 |
International |
Assessment of Thermal Degradation by Cumulative Variation of Ultrasonic Nonlinear Parameter
|
208635 |
International |
Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves
|
124384 |
International |
Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameter
|
303675 |
International |
Experimental Comparison of Nonlinear Parameters Obtained from Absolute Measurement and Relative Measurement
|
168801 |
International |
Comparison of Ultrasonic Nonlinear Parameters Measured by PZT and LiNbO3 Transducers
|
140663 |
Award |
KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희
|
69653 |
Award |
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)
|
67164 |
Award |
2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)
|
65192 |
Award |
JMST - JMST Contribution Award
|
66304 |
International |
Nanotribological and wetting performance of hierarchical patterns
|
123707 |
Award |
2015 산업부장관 표창
|
67678 |
International |
Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System
|
148188 |
International |
Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging
|
117709 |
International |
Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic
|
233572 |
International |
Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement
|
139093 |
International |
Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy
|
160581 |
International |
Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime
|
284136 |
International |
Real-time detection of surface cracks on silicon wafers during laser beam irradiation
|
250457 |
Domestic |
High power CW laser-induced damage of CMOS image sensor
|
97838 |
Domestic |
Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver
|
96900 |
Domestic |
Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material
|
95901 |
International |
Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves
|
122067 |
International |
Laser ultrasonic inspection in ablation regime
|
132571 |
International |
Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique
|
104295 |
Award |
대한기계학회 - 우수 학생 논문상
|
66774 |
Award |
비파괴검사학회지 - 우수논문상
|
67901 |
Award |
한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)
|
114558 |
International |
In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
|
129722 |
International |
In situ detection of laser-induced slip initiation on the silicon wafer surface
|
104342 |
International |
Initiation time of near-infrared laser-induced slip on the surface of silicon wafers
|
112815 |
Domestic |
Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6
|
121976 |
Domestic |
Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime
|
128464 |
International |
Slip damage of silicon wafers subjected to continuous infrared laser irradiation
|
105528 |
International |
Thermal damages on the surface of a silicon wafer induced by a near-infrared laser
|
639955 |
Domestic |
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
|
224131 |
Domestic |
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models
|
125812 |
Domestic |
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy
|
118742 |
Domestic |
A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구
|
124470 |
Award |
비파괴검사학회지 - 우수 논문상
|
71672 |
Award |
한국ITS학회 - 우수논문상
|
77858 |
International |
Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave
|
139786 |
International |
Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)
|
191907 |
International |
Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection
|
106350 |
Domestic |
Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam
|
104437 |
International |
Imaging of contact acoustic nonlinearity using synthetic aperture technique
|
121329 |
Domestic |
Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique
|
111739 |
Domestic |
Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile
|
133206 |