Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques

Admin

댓글 0조회 수 1401추천 수 0

단축키

←이전 문서

→다음 문서

가 + - Up Down Comment Print

단축키

←이전 문서

→다음 문서

가 + - Up Down Comment Print

Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques

https://www.mdpi.com/1996-1944/15/11/3876

« Prev In-situ and Layer-by-layer Grain Size Estimation of Additivel...

In-situ and Layer-by-layer Grain Size Estimation of Additivel... 2022.02.21by

Tensile properties evaluation of additively manufactured Ti-6... Next »

Tensile properties evaluation of additively manufactured Ti-6... 2022.02.21by

Category

분류	제목	조회 수
Award	IJPEM-GT Most Cited Article Award(박성현)	43
International	Compensation of system nonlinearity in the measurement of acoustic nonlinearity parameters	56
International	Full-range stress–strain curve estimation of aluminum alloys using machine learning-aided ultrasound	374
International	Nondestructive Inspection of Directed Energy Deposited Components Using Scanning Acoustic Microscopy with Metalworking Fluids	265
International	Nondestructive Inspection of Cylindrical Components Repaired Via Directed Energy Deposition Using Scanning Acoustic Microscopy with Metal Lubricants	1256
International	Plastic properties estimation of aluminum alloys using machine learning of ultrasonic and eddy current data	390
International	Calibration method using a narrowband signal for measurement of the acoustic nonlinearity parameter	221
Award	2022.11 한국비파괴검사학회 2022 추계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)	666
Award	2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (한희진, 장경영)	566
Award	2021.12 한국비파괴검사학회 2021 추계학술대회 우수논문발표상 (방성준, 송동기, 장경영)	532
International	Comparisons of second- and third-order ultrasonic nonlinearity parameters measured using through-transmission and pulse-echo methods	2638
Award	IJPEM-GT 저널지 편집장 우수논문 선정 (박성현)	916
Award	2022 산업과학연구소 우수논문상 (박성현)	849
International	In-situ and Layer-by-layer Grain Size Estimation of Additively Manufactured Metal Components using Femtosecond Laser Ultrasonic Technique (Submitted)	1240
International	Microstructural Characterization of Additively Manufactured Metal Components Using Linear and Nonlinear Ultrasonic Techniques	1401
International	Tensile properties evaluation of additively manufactured Ti-6Al-4V/yttria-stabilized zirconia composite using absolute nonlinear-ultrasonic technique (Submitted)	12719
International	Generation and Measurement of Gigahertz Ultrasonic Waves in Additively Manufactured Thin Metal Components using Femtosecond Laser and Application to In-situ Grain size Monitoring (Submitted)	26687
Domestic	Porosity evaluation of additive manufactured parts: ultrasonic testing and eddy current testing	125671
International	Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique	20404
International	Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing	29627
International	Experimental Verification of Contact Acoustic Nonlinearity at Rough Contact Interfaces	50662
International	Compensation of a Second Harmonic Wave Included in an Incident Ultrasonic Wave for the Precise Measurement of the Acoustic Nonlinearity Parameter	46672
International	Measurement of Absolute Acoustic Nonlinearity Parameter Using Laser-Ultrasonic Detection	44081
International	Rapid Molecular Diagnostic Sensor Based on Ball-Lensed Optical Fibers	36915
International	Porosity Evaluation of Additively Manufactured Components Using Deep Learning‑based Ultrasonic Nondestructive Testing (Editor's pick)	12333
International	Deep Learning-Based Ultrasonic Testing to Evaluate the Porosity of Additively Manufactured Parts with Rough Surfaces	22177
International	Analysis of the influence of surface roughness on measurement of ultrasonic nonlinearity parameter using contact-type transducer	514664
International	Indirect Method for Measuring Absolute Acoustic Nonlinearity Parameter Using Surface Acoustic Waves with a Fully Non-Contact Laser-Ultrasonic Technique	31991
International	Evaluation of yield strength by ultrasonic reconstruction of quadratic nonlinear Stress-Strain curve	66971
International	Ultrasonic nonlinearity parameter in uniaxial stress condition	43950
International	Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel	7243
Award	2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (유지웅, 송동기, 장경영)	2337
Award	2021.07 한국비파괴검사학회 2021 춘계학술대회 우수논문발표상 (송동기, 장경영)	791
Award	2020.06 한국비파괴검사학회 비파괴검사학회지 우수논문상 / 2020.07 한국과학기술단체총연합회 과학기술우수논문상 (최성호,김상민,장경영)	10930
Award	2019.11 한국비파괴검사학회 2019 추계학술대회 우수논문발표상 (박성현, 홍정연, 최성호, 장경영)	19653
Award	2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (송동기, 류주영, 홍정연, 최성호, 장경영)	20826
Award	2019.07 한국비파괴검사학회 2019 춘계학술대회 우수논문발표상 (박성현, 심명종, 최성호, 장경영)	23194
International	Nondestructive Evaluation of Thermal Aging in Al6061 Alloy by measuring Acoustic Nonlinearity of Laser-generated Surface Acoustic Waves	66601
International	Stress estimation using the acoustoelastic effect of surface waves in weak anisotropic materials	86328
International	Comparison of Linear and Nonlinear Ultrasonic Parameters in Characterizing Grain Size and Mechanical Properties of 304L Stainless Steel	31174
Domestic	Imaging and Sizing of Surface Defects Using Synthetic Aperture Focusing of Laser-generated Surface Waves	35249
Award	2018 산업통상자원부장관 위촉장	29508
Award	2018.11 비파괴학회 우수포스터상 (이영진,박기태,김종범,김창수,장경영)	32480
Award	2018.11 비파괴학회 우수논문발표상 (김창수,김종범,송동기,장경영)	87198
International	Internal defect detection using laser-generated longitudinal waves in ablation regime	109287
International	Synthetic aperture imaging of contact acoustic nonlinearity to visualize the closing interfaces using tone-burst ultrasonic waves	88527
Domestic	Variation of Acoustoelastic Effect in Al6061-T6 according to Heat Treatment Time	62633
International	Dependence of Nonlinear Ultrasonic Characteristic on Second-Phase Precipitation in Heat-Treated Al 6061-T6 alloy	74885
International	Relative Measurement of the Acoustic Nonlinearity Parameter using Laser Detection of an Ultrasonic Wave	100561
International	A Method to Estimate the Absolute Ultrasonic Nonlinearity Parameter from Relative Measurements	87040
International	Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness	99984
Award	2017년 비파괴검사학회지 우수논문발표상 (하홍필, 김종범, 장경영)	50215
Award	2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (박사과정)	62070
Award	2017 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)	64813
Award	2016년 비파괴검사학회지 우수논문발표상 (박성현, 김종범, 이주호, 장경영)	65896
International	Assessment of Thermal Degradation by Cumulative Variation of Ultrasonic Nonlinear Parameter	209171
International	Assessment of Thermal Aging of Aluminum Alloys by Acoustic Nonlinearity Measurement of Surface Acoustic Waves	124544
International	Absolute Measurement and Relative Measurement of Ultrasonic Nonlinear Parameter	304167
International	Experimental Comparison of Nonlinear Parameters Obtained from Absolute Measurement and Relative Measurement	169375
International	Comparison of Ultrasonic Nonlinear Parameters Measured by PZT and LiNbO3 Transducers	140923
Award	KSME-SEMES 오픈 이노베이션 챌린지 동상 수상 - 윤성희	69678
Award	2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 전지현 (석박사통합과정)	67214
Award	2016 글로벌박사 펠로우십 (Global Ph.D. Fellowship) 1건 선정 - 서호건 (박사과정)	65218
Award	JMST - JMST Contribution Award	66350
International	Nanotribological and wetting performance of hierarchical patterns	123927
Award	2015 산업부장관 표창	67710
International	Demonstration of Disturbance Propagation and Amplification in Car-Following Situation for Enhancement of Vehicle Platoon System	148699
International	Relative Measurement of Acoustic Nonlinear Parameters and Comparison of Sensitivity to Thermal Aging	117919
International	Non-contact Measurement of Elastic Modulus by using Laser Ultrasonic	234193
International	Relationship between Second- and Third-order Acoustic Nonlinear Parameters in Relative Measurement	139680
International	Non-Contact Evaluation of Acoustic Nonlinearity of a Laser-Generated Surface Wave in a Plastically Deformed Aluminum Alloy	160886
International	Influence of repetitive pulsed laser irradiation on the surface characteristics of an aluminum alloy in the melting regime	285070
International	Real-time detection of surface cracks on silicon wafers during laser beam irradiation	251340
Domestic	High power CW laser-induced damage of CMOS image sensor	97904
Domestic	Measurement of Ultrasonic Nonlinear Parameter by Using Non-Contact Ultrasonic Receiver	96960
Domestic	Study on the Nonlinear Electromagnetic Acoustic Resonance Method for the Evaluation of Hidden Damage in a Metallic Material	95965
International	Influence of laser beam profiles on the frequency bandwidth of laser-generated surface acoustic waves	122378
International	Laser ultrasonic inspection in ablation regime	132920
International	Improvement of Crack Sizing Performance by using Nonlinear Ultrasonic Technique	104667
Award	대한기계학회 - 우수 학생 논문상	66810
Award	비파괴검사학회지 - 우수논문상	67941
Award	한국도로공사 교통데이터 공모전 - 대한교통학회 회장상 수상 (김진수)	114593
International	In-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe	130203
International	In situ detection of laser-induced slip initiation on the silicon wafer surface	104521
International	Initiation time of near-infrared laser-induced slip on the surface of silicon wafers	113549
Domestic	Evaluation of Ultrasonic Nonlinear Characteristics in Artificially Aged Al6061-T6	122045
Domestic	Simulations for Internal Defect Inspection using Laser Generated Ultrasonic Wave in Ablation Regime	128667
International	Slip damage of silicon wafers subjected to continuous infrared laser irradiation	105631
International	Thermal damages on the surface of a silicon wafer induced by a near-infrared laser	641390
Domestic	Feasibility of MFC (Macro-Fiber Composite) Transducers for Guided Wave Technique	225211
Domestic	Initial Second Harmonic Generation in Narrowband Surface Waves by Multi-Line Laser Beams for Two Kinds of Spatial Energy Profile Models	125875
Domestic	Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy	118832
Domestic	A6061 합금의 석출경화 열처리에 따른 탄성파의 음향 특성 연구	124595
Award	비파괴검사학회지 - 우수 논문상	71703
Award	한국ITS학회 - 우수논문상	77894
International	Crack Detection in Single-Crystalline Silicon Wafer Using Laser Generated Lamb Wave	140052
International	Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy (Al-Mg-Si-Cu)	192001
International	Application of Macrofiber Composite for Smart Transducer of Lamb Wave Inspection	106394
Domestic	Thermal Damage Characterization of Silicon Wafer Subjected to CW Laser Beam	104552
International	Imaging of contact acoustic nonlinearity using synthetic aperture technique	121829

태그

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

✔ 설치 취소

SketchBook5,스케치북5

Impacts of Hanyang's Research :: Nondestuctive Evaluation for Future Safety